9
User Guide
EDID
1) Press EDID, the LCD will state current mode of operation.
1-1 Press EDID for 3 seconds, will be able to change the mode between Auto
mode/Manual mode.
2) In Manual mode
– EDID Learning
2-1 Press the output that needs to be learned.
2-2
The LCD will show “Device ID” of the output.
2-3 Press the input(s) which you want to learn the EDID from the pressed output.
2-4
Press ENTER, the LCD will show “Success” or “Fail” to indicate the learning status.
3) In Manual mode
– Default EDID
3-1 Press the OUTPUT 1~8 button for 3 seconds as default 1~8 EDID.
3-2
The LCD will show “D mode number”.
3-3 Press the input(s) which you want to learn the default EDID from the pressed
output(default).
3-4
Press ENTER, the LCD will show “Success” or “Fail” to indicate the learning status.
4) In Manual mode
– Check input status
4-1 Press the input.
4-2 The learned EDID output number and device ID will show on the LCD.
5) In Auto mode
The device scans through all the outputs and compares the EDID, and makes a
common denominator to use on the inputs. It will be the highest probability of operation
with all displays connected.
Note: To discontinue the EDID setting, please press the EDID again. The operation will
be canceled when there is no activity for more than 3 seconds from last button
press.
