11
GB/IE/NI
Displaying the temperature
in °C / °F
The current indoor air temperature
7
is indicated
on the LCD.
Press the °C / °F button
20
to switch between
the Celsius and Fahrenheit temperature scales.
Moon phase
The product shows the current moon phase
8
in
the LC display.
It uses the following symbols:
Full moon
Waning
gibbous
Last quarter
Waning
crescent
New moon
Waxing
crescent
First quarter
Waxing
gibbous
Displaying summertime
Summertime is automatically indicated on the LCD by
the summertime icon
6
. The product receives
the information as to whether it is summertime or
not from the DCF radio signal.
Note:
Reception of the radio signal may be seriously
disrupted in reinforced concrete buildings.
Setting the timer
Press and hold the °C / °F button
20
for ap-
prox. 3 seconds. The Timer symbol
2
will be displayed.
Press UP button
25
to change the values for
hours and DOWN button
24
to change the
values for minutes.
Hint:
If you press and hold down the UP or
DOWN, you accelerate the process and reach
the desired value more quickly.
Press the WAVE button
19
to start the timer.
The timer now begins counting down and the
Timer symbol
2
is flashing.
You can press the WAVE button again
anytime to stop the timer from counting down.
Press the WAVE button again to continue the
count down.
When the set time has elapsed, a signal tone
will sound for a period of one minute.
Press the WAVE button to stop the signal tone
from sounding.
Press the ALARM ON / OFF button
29
to reset
the timer back to 00:00.
Press and hold °C / °F button
20
for approx.
3 seconds to return to the normal time display.
Note:
The maximum countdown time is
19 hour and 59 minutes!
Troubleshooting
This product has delicate electronic components.
This means that if it is placed near an object
that transmits radio signals, it could cause inter-
ference. If the display indicates a problem,
move such objects away from it.
Electrostatic discharges may cause malfunctions.
In the event of such malfunctions, remove the
batteries briefly and reinsert them or press the
RESET button
30
at back of the product.
Note:
All setting will be clear once the batteries
are removed. Or the RESET button
30
have
been pressed.
