23
GB/IE
Removing segments (Fig. D)
Note:
The segments which can be removed are marked with an
arrow (see Fig . D) . They are connected together with pins . These can
be pushed out in the direction of the arrow with the repair set
8
. Use
a pair of tweezers if necessary in order to remove the pins .
Place the watch with the dial facing downwards in the repair
set
8
.
Remove the pins of the segment that you wish to remove (as
described above) and take out the segment
7
.
Note:
If you would like to take out more than one consecutive
segment
7
, it is sufficient to remove the two outer pins .
Connect the watch strap together again by joining the loose
segments
7
with a pin . Press this pin against the direction of the
arrow into the adjacent segments
7
.
