- 11 -
Time setting, 12/24 hours time format
Press MODE to switch to the time setting mode. The
seconds will blink on the display. Press START to reset
the seconds and confirm your setting by pressing
RESET.
The hours will blink on the display. Set the hours by
pressing START. In 12-hour mode the letter A (AM) or
P (PM) will appear. In 24 hours mode the letter H will
appear. To switch between 12 and 24 hour modes
advance the time by 24 hours.
Confirm your setting by pressing RESET.
The minutes will blink on the display. Set the minutes by
pressing START and confirm your setting by pressing
RESET.
Set the month, the day and the day of the week in the
same way.
Complete the setting procedure by pressing MODE.
Stop watch
Press MODE to switch to stop watch mode. ST will
appear on the display.
Press START to start or stop the stop watch.
Press RESET while the stop watch is running to record
a lap time. The stop watch will continue to run internally.
Press RESET again to return to the running time.
Stop the stop watch and press RESET to reset the
recorded time.
Alarm
Press MODE to switch to alarm mode. AL will appear
on the display.
Press RESET to enter setting mode.
The hours of the alarm time will blink on the display. Set
the hours by pressing START and confirm your setting
by pressing RESET.
The minutes of the alarm time will blink on the display.
Set the minutes by pressing START and confirm your
setting by pressing RESET.
Repeatedly press START to activate or deactivate the
alarm and the hourly chime. If the Alarm is activated
ALM will appear. If the hourly chime is activated the
symbol will appear.
Disposal of the electronic appliance
This electronic appliance may not be disposed
of with normal household waste. Dispose of the
unit at an approved disposal facility or at your local
recycling centre. Please observe the current rules and
regulations when disposing of the appliance. Contact
the disposal system if in doubt.
All manuals and user guides at all-guides.com