English
OSD Settings
This function will into the sub-page ( Shown in Pic 6 ) to adjust display’s
function for OSD.
OSD Position :
Press or - to select between horizontal and
vertical OSD Position adjustment.
Horizontal :
To horizontally adjust the OSD position.
+
:
move OSD to the right,
-
:
move OSD to the left.
Vertical :
To vertically adjust the OSD position.
+
:
move OSD up,
-
:
move OSD down.
Transparency :
To adjust the Transparency of the OSD image.
OSD Time Out :
To automatically turn off On Screen Display(OSD)after a
preset period of time.
Setup
This function will into the sub-page ( Shown in Pic 7 ) to adjust display’s
function for OSD.
Language :
To allow users to choose from available languages.
Audio
：
To adjust the volume of speaker output.
Input :
When press Input Select change Input signal to VGA or DVI and HDMI.
HDMI-Audio Select :
The default setup is Digital Audio. When you use
DVI to HDMI cable to plug into the HDMI connector, you must to set the
audio select to Analog Audio.
DCR:
To turn On or Off the DCR function(dynamic contrast ratio).
Reset:
To recall the default values.
Pic 6
Pic 7
7
