19
c. Click the “Yes” button on the “Confirm
operation” window
d. Wait for the driver disk to be written.
3.7.2. F6 driver installation
1. Press the
F6
key when prompted in the status line with the
Press F6 if you need to install a
third party SCSI or RAID driver
message. This message appears at the beginning of Windows XP
setup (during text-mode phase).
Note:
Nothing will happen immediately after pressing F6. Setup
will temporarily continue loading drivers. You will then be prompted with a screen asking you to
load support for mass storage device(s).
2. Press the
S
key to
Specify Additional Device
.
3. You will be prompted to
Please insert the disk labeled Manufacturer-supplied hardware
support disk into Drive A:
When prompted, insert the floppy disk containing the following files:
IAAHCI.INF, IAAHCI.CAT, IASTOR.INF, IASTOR.CAT, IASTOR.SYS, and TXTSETUP.OEM and
press the
Enter
key.
4. After pressing Enter, you should be presented with a list of available SCSI Adapters. Select
your controller from the list. The up and down arrow keys can be used to scroll through the list as
all controllers may not be visible. The list may include:
o
Intel® 82801ER SATA RAID Controller
o
Intel® 82801FR SATA RAID Controller
o
Intel® 82801GR/GH SATA RAID Controller
o
Intel® 82801GHM SATA RAID Controller
o
Intel® 631xESB/632xESB SATA RAID Controller
o
Intel® 82801R/DO/DH SATA RAID Controller
