27
Command Type Setting Command
STX 05 C n ETX
/Change the command type setting/
ASCII Format
STX 05 C n ETX
Dec. Format
[02] [05] [67] n [03]
Hex. Format
[02h][05h][43h] n [03h]
30h
≦
n
≦
37h
Description
This command will change the command type and initialize the
display.
The display emulation mode is based on DSP800/ ESC/ ADM 787/
POS7300/ AEDEX/ UTC/ CD5220 mode
n
Command Type n
Command Type
30h
DSP800
34h
AEDEX
31h
ESC/POS
35h
UTC/P
32h
POS7300
36h
UTC/S
33h
ADM787
37h
CD5220
Run Demo message
STX 05 D 08 ETX
/Run demo message/
ASCII Format
STX 05 D 08 ETX
Dec. Format
[02][05][68][08][03]
Hex. Format
[02h][05h][44h][08h][03h]
Description
Run demo message for the display.
The demo message is available in POS7300, DSP800, EPSON
ESC/POS and CD5220 command modes.
Show Firmware Version
STX 05 V 01 ETX
/Show Firmware Version/
ASCII Format
STX 05 V 01 ETX
Dec. Format
[02][05][86][01][03]
Hex. Format
[02h][05h][56h][01h][03h]
Description
Show firmware version.
