23
7. Customer Display Software Commands
The default settings for the Customer Display are:
•
EPSON ESC/POS command set
•
9600 Baud, 8 bits, no parity, no flow control
Software Utilities
The following software utilities are provided for the customer display on the driver CD
Folder/File
File Description
<CD>:\Common\CustomerDisplay\Configuration
Configuration utility
<CD>:\Common\CustomerDisplay\Font_Editor
Font Editor utility
<CD>:\Common\CustomerDisplay\Firmware_Update Firmware update utility
A user manual for the utilities is available on the CD at the following location:
Folder/File
File Description
<CD>:\Common\CustomerDisplay\
User manual
Software Status Setting Commands
When the system is powered on, it will read the EEPROM setting to set the
Command
Type
,
Baud Rate
,
Parity, Data Length, Demo Mode
setting and
International Character
Set
. The user can change the Software Status Setting Commands using the command
sequences described below.
