DEMO XTR-8LR100
DEMO XTR-8LR10
User Manual
Le caratteristiche tecniche possono subire variazioni senza preavviso. AUR°EL S.p.A. non si assume la responsabilità di danni causati dall’uso improprio del dispositivo.
AUR°EL S.p.A. Via Foro dei Tigli, 4 - 47015 Modigliana (FC) – ITALY
Tel.: +39.0546.941124 Fax: +39.0546.941660
http://www.aurelwireless.com
- email:
Rev 2.2 17/05/2016
Page
5
of
17
4.
Open a communication software for serial ports, it is recommended RealTerm free download on the
following link:
http://sourceforge.net/projects/realterm/files/Realterm/
All the examples mentioned in this manual have been performed with Realterm.
Several programs of communication are available for serial ports suitable for this purpose, however, in
order to exclude errors introduced by them and to get adequate support by the supplier, it is
recommended to perform the experiments described below using Realterm, at least until it reaches an
appropriate level of confidence with XTR-8LR100 o XTR-8LR10.
5.
Start the program and set the communication parameters as follows:
communication speed 9600bps, a START bit, 8 data bits and STOP bits, no parity. In this case, select
the menu item "Port 26", used in this example as associated port to DEMO XTR-8LR100.
After each change of the working parameters of the serial port, remember to click the "Change" button
to Realterm, the set values are visible at any time in the small square at the bottom right of the screen
Realterm.
