8
Vcom V90 PCI Modem Installation Guide
Aureal Inc.
Verifying Your Modem Installation
Verifying Your Modem Installation
After installing your Vcom V90 PCI modem you should verify that it has been installed
properly
1. Open the Control Panel window.
To open the Control Panel window, click Start | Settings | Control Panel on the
taskbar.
2. Double-click the Aureal Software Modem icon.
This opens the Aureal PCI Software Modem dialog box.
3. Click Properties.
This opens the Modems Properties dia-
log box.
4. Click the Diagnostics tab.
This shows your computer’s current COM
port configuration.
5. Select the COM port to which the
Aureal software modem was installed.
6. Click More Info …
This starts the modem diagnostics. Windows
informs you that the diagnostic may take a
few minutes to run. If successful the More
Info … dialog box may appear similar to what’s shown here.
If the diagnostic fails see “Troubleshooting” on page 11.
