auray ISO-ARMOR-2, Owner'S Manual, Page: 5 / 8

5 ISO-ARMOR-2
Owner’s Manual
1
2
6
5
Note: Shorter microphones can also be
placed into the shock mount adapter
and inserted into the ISO-ARMOR-2
through the front of the shield.
5
5. Place the assembly onto your
microphone’s shock mount,
and connect the microphone
cable.
6
6. Replace the pop screen, and
tighten the locking screw.
You’re ready to record.
Replacing the Shock Mount
Suspension Bands
The shock mount adapter has two sets
of suspension bands. If they break or
become loose, follow these steps to
replace them:
1. Unscrew the insert ring
by inserting the tip of a
pen or small screwdriver
into the holes and turning
counterclockwise.
2. Remove the old bands and
install the new ones by
stretching them across the
insert slots.