auray ISO-ARMOR-2, Owner'S Manual, Page: 4 / 8

4 ISO-ARMOR-2
Owner’s Manual
Setting Up the ISO-ARMOR-2
1.
Loosen the locking screw,
and remove the pop screen
by sliding it up and out of the
bracket.
1
2. Remove the shock mount
adapter from the microphone
hole.
2
3. Insert the bottom end of the
microphone into the center
of the shock mount so the
grille is visible over the shock
mount.
3
4. Insert the microphone and
shock mount adapter into the
ISO-ARMOR-2 up through
the microphone hole. The
microphone should face
forward, and the microphone
capsule should be vertically
centered. If the microphone
has buttons or switches,
keep them exposed above
the microphone hole for easy
access.
4
Make sure the microphone
and shock mount adapter are
held securely in place by the
edges of the shock mount
adapter before proceeding.
2
3
4
1