MOTION SENSOR RANGE
OPERATION
MODE 1:
OFF
One motion sensor can be used in a range of
max. 10 meters. Actual range of the motion
detection sensor depends on mounting height
as shown in the illustration.
TROUBLESHOOTING
DISPOSAL
Make sure the solar panel is kept dust free and clean. Clean it regularly (1x per month) with a dry cloth
and with warm soapy water. Dirty solar panels may not fully charge the battery. This can lead to premature
aging of the battery and may result in unreliable operation of the device.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available. If electrical
appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and
get into the food chain, damaging your health and wellbeing. When replacing old appliances with new
ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge.
Problem 1: Light does not turn on if something or someone moves into the detection range.
Possible solution: Make sure that:
· The motion sensor is clean (if not, please clean it).
· The solar panel is clean (if not please clean it)
· The solar cell was mounted so that it is able to receive as much as possible direct sunlight during the
day
· The battery is sufficiently charged (if not, leave the lamp for 1-2 sunny days charging in the OFF
position)
Problem 2: Light flashes incorrectly or low light
Possible solution:
· Weak battery. Let the lamp charge again for 1-2 sunny days (or 3-4 “Ordinary” days) in the OFF
position.
TECHNICAL DATA
· MODEL: GS8
· TYPE:Solar LED Wall Light with Infrared
Motion Sensor
· Solar charging: 5-7 hrs/day by sun
· Motion sensor: intelligent, 2-6m
· Light sensor: built-in in solar panel
· Power switch:
· Protect function: hardware & software
· Kelvin: Main light= 4000K normal white, Back
light=3000K warm white
· Lumen: 260LM MAX
· Detection angle: 120°
· Light angle: 120°(Asymmetric lens)
· HP LED: 18x 2835 SMD high efficiency LED
· Solar panel: 1.0W monocristalline cell polished
· Battery: 1x HP Li-ion 3.7V 1500 mAh
· IP44 outdoor-proof
· Dimensions: 120x105x64mm
· Weight: 186g
· Color: Black
2-6M
2-6M
INSTALLATION
HEIGHT
2-4M
10M
60°
60°
MODE 3 :
60°
60°
MODE 2:
AUTO
60°
60°
MODE 4:
60°
60°
The GS8 has 4 lighting modes, which can be selected using the
Mode Switch
:
1. MODE 1: OFF
2. MODE 2: AUTO
Push the Mode Switch on AUTO position. The main light and back light will turn ON automatically at night
(<30 LUX) at full light (100%) when motion is detected in the detection range. About 20 seconds after the
last motion has been detected, the main light and back light turn OFF.
3. MODE 3:
Push the Mode Switch on position. The main light and back light will turn ON automatically at night
(<30 LUX) at full light (100%) when motion is detected in the detection range. About 20 seconds after the
last motion has been detected, the main light turns to 3% of full light and the back light turns ON and keep
on working till the morning time or till the battery is empty.
4. MODE 4:
Push the Mode Switch on position. The main light and back light will turn ON automatically at night
(<30 LUX) at full light (100%) when motion is detected in the detection range. About 20 seconds after the
last motion has been detected, the main light turns OFF and the back light turns ON and keep on working
till the morning time or till the battery is empty.
5. Push the Mode Switch on OFF position, the lamp is turned OFF completely. The solar cells will charge
the battery without activating the lamp. Leave the lamp in this position for at least 2 or 3 sunny days so the
battery can be fully charged before using it.
CLEANING
