AURATON R30 RT, Owner'S Manual

Page: 6 / 32

6
Description of the AURATON RT receiver
The AURATON RT receiver works with the wireless AURATON R30 RT controller. The
received is installed near the heating or air conditioning device and may work with the
load of 16A/10A.
mounting hole
detachable 230V power
supply connection
terminals
detachable control
connection terminals
mounting hole
power button
power supply
diode
button for unpairing devices
diode indicating that
the actuator device has
been switched on
diode indicating that
the actuator device has
been switched off
button for pairing
devices with the
RT receiver
Legend – description of LED signalling
The LED light’s green – the output device is off
(the contacts COM and NC are closed).
The LED light’s red – the output device is on
(the contacts COM and NO are closed).
The LED flashes green – the RT receiver awaits the device to be paired
(chapter: “Pairing the AURATON R30 RT wireless regulator and the RT
receiver”).
The LED flashes red – the RT receiver awaits the device to be
deregistered (chapter: “Deregistering the regulator from the RT
receiver”).
Green power supply diode – the RT receiver is switched on.
The LED flashes alternating red and green:
ALARM - the RT receiver has lost connection with one of the paired
devices (chapter “Special situations”).
RESET - receiver deregisters all previously paired devices
(chapter “Deregistering all devices paired with the RT receiver”).