18
Manual control
When, for any reason, you would like to suspend execution of the program for
a certain period of time, the temperature can be set manually for a specified
time. In such a case you have to:
1.
Press the
button. This will cause the
and
icons to appear
flashing on the display. The temperature field will become editable, with
the previously programmed value set as default.
Use the‚
buttons to edit the value, and the
button to
confirm settings.
2.
To leave the manual control mode, press the
button.
[auto]
[set.]
[ha]
[updow]
[okok]
[auto]
Vacation mode
Should there be a need for suspending execution of the programs for
a prolonged time, the
vacation mode
can be used.
When this option is active, the regulator executes only the “vacation
temperature”
(see chapter: “Temperature programming”).
Maximal duration of operation in vacation mode is 6 days, 23 hours and 59
minutes.
In order to enter the vacation mode:
1.
Press the
button and hold it for
3 seconds.
This will cause flashing of the
and
icons as well as the field time.
2
. Using the‚
buttons, set the time
when the vacation mode should end
.
3
. By pressing the
button you can set
the day when the vacation mode should
end.
The
icon will start flashing on the
display. Using the,
buttons, set
the day when the vacation mode should
end.
4
. Confirm the setting by pressing
the
button.
[auto]
[set]
[dri]
[updow]
[1-7]
[set ]
[updo]
[okok]
Switching off the receiver for a period of time
Pressing the
button and holding it for 5 seconds causes switching off
the thermostat relay, setting the temperature in the receiver to 4°C and
putting out all elements on the display except for current temperature, time
and day of week.
To restore normal operation of all functions of the regulator, press
the
button.
[powe]
[powe]
19
Anti-freeze mode
The regulator is equipped with a setpoint for the anti-freeze temperature.
This setpoint can be set within the range from 4 to 10°C. (Factory set at 7°C)
The anti-freeze mode is used during a prolonged period of absence or outside
the heating season and is designed to prevent water in the heating system
from freezing.
1
. To enter the anti-freeze mode, press the
button. The “
” icon
will appear on the display.
2
. To leave the anti-freeze mode press the
or
button.
[powe]
sno
[auto]
[powe]
The “ ” symbol will be displayed on the screen while the vacation mode is
active. You can leave the vacation mode earlier by pressing the
button.
[auto]
Viewing the currently active program
Pressing the
button in the normal operation mode causes the
INFO
segment and all the parameters of the currently executed program
(day of week, temperature and ending time) to flash for 10 seconds
on the display.
To restore the regulator back to normal operation, press the
button
again.
[okoko]
[okok]
Relay operating time counter
Pressing the
button and holding it for 3 seconds activates
the
INFO 24H
function that counts the relay operating time during the last 24
hours.
Pressing the
button again causes the
INFO TOTAL
segment to appear,
corresponding to the function of counting the accumulated number of days
of relay operation.
To restore the regulator back to normal operation, press the
button
again.
NOTE
: To reset the total counter of days of relay operation to zero, press
the
button and hold it for 5 seconds, while in the
INFO TOTAL
mode.
NOTE
: “RESET” causes both operating time counters to be et to zero.
[okok]
[okoko]
[okoko]
[okoko]
Summary of Contents for 2030
Page 1: ......
Page 2: ......
Page 30: ...A template for drilling holes for fastening the AURATON RTH receiver 1 1 scale ...
Page 32: ...www auraton pl ...