Aurasound FUNbuds, User Manual

Page: 11 / 48

9
(1) Put the earphones into the charging case, close the cover, wait for 8
seconds, and open again to pair.
(2) Re-searching the device Bluetooth.
(1) Open the “setting” in your phone/computer.
(2) Find the setting of “Maximum Volume Control”.
(3) Turn off “Reduce Maximum Volume of other device”.
(1) Check whether the charging case is powered.
(2) Make sure the charging area of earphone’s placement is clean.
(3) The wired rated input of the charging case is 5V 380mA,and the
wireless rated input is 5V 220mA.Do not use any high-power adapter
or fast charger to charge the charging case.
Turn on the earphones,long press the smart touch area for 8 seconds.
After hearing the prompt tone “Power off”, long press the smart touch
area again. After hearing “Beep”, put the earphones into the charging
case and cover the case, wait for about 5 seconds to take it out, and then
pair with the new device.
1 Beyond the warranty period.
2 Any failure to use, maintain or repair the product in accordance with the
requirements of the user manual, resulting in damage and dirty appear-
ance.
3 Any damage caused by the disassembly by non-Aurasound authorized
repairers.
4 Any water inlet, scratches, accidental drop or other accidents not caused
by Aurasound.
Non-warranty Regulations
The volume shall not be too high in daily use, otherwise it is easy to damage your hear-
ing.Kindly suggest:take off your earphone after using 1hr for rest.
Q&A
1.Earphone bluetooth cannot be searched or lost connection
2.Can't control the maximum volume of earphone
3.The earphone cannot be charged
4.How to reset earphones ？