19
5. SYSTEM
1. VOL.MOD
1. MASTER
All input channels will use same volume setting. Default volume at first use is
20 (-40dB).
2. INDVDL
(default)
Each input channel has its own volume setting. When you switch to new input
channel, VEGA will fade in slowly to avoid sudden loud sound. Default volume
for every input channel is 20(-40dB).
3. BACK
Back to previous menu.
2. DISPLAY
1. KEEP ON (default)
Display will keep on till manually switch off by remote control. Display will light
again by any button on the remote control or the rotary switch.
2. AUTO
OFF
The display switches off automatically after 15 seconds without any operation.
And it will light again by any button on the remote control or the rotary switch.
3. DIM
Set display brightness to low.
4. NORMAL
Set display brightness to middle.
5. BRIGHT
Set display brightness to high.
6. BACK
Back to previous menu.
3. SLEEP
1. DISABLE
Disable sleep function. When in standby mode, VEGA will shut down most of
the circuit to minimize energy consumption.
2. ENABLE
(default)
Enable sleep function. When in standby (sleep) mode, VEGA will only shut
down some part of digital circuits, keep all analog circuits on power and the
Femto clock active. If this function is enabled, you don't need to warm up the
unit every time you use it as VEGA will stay in the best sounding conditions
after resume. Power led will display at low brightness in sleep mode to remind