13
Operation by Rotary Switch
VEGA uses also a
Rotary Switch (7)
to make all operations if you don't want to use the
remote control. The rotary switch can be rotated in clockwise or anti-clockwise order at 20
steps for a full cycle and be pushed for confirmation.
Start Work/Resume
After power on, VEGA will be in standby or sleep (default) mode depending on your
setting. To start of resume the unit, press the rotary switch briefly, VEGA will run
self-test and start.
Adjust Volume
The easiest way to change the volume is to operate the rotary switch at main screen.
A clockwise rotation will increase volume and an anti-clockwise rotation will decrease
volume. VEGA can detect the speed of rotation and apply corresponding acceleration.
At low speed, a single step of rotation means one step of volume change, the higher
speed you rotate, the more steps of volume it will change.
Menu Operation
To enter setup menu, press the rotary switch briefly to display the menu items, rotate
the switch will highlight the selected menu item in sequence. To enter the selected
menu item or confirm the operation, press the rotary switch briefly. If no operation is
applied for 15 seconds, VEGA will quit to main screen automatically.
Standby(Sleep)
Press and hold the rotary switch at main screen for 3 seconds, a dialog box will ap-
pear to confirm the operation, select YES (by default) and press rotary switch to
confirm, or select NO and press rotary switch to quit. If no operation is applied for 15
seconds, VEGA will quit to main screen automatically.
USB Driver Installation
Under Apple Mac OS X 10.6.4 or above and some versions of Linux system which support
USB 2.0 audio device, there is no need of driver installation. However, driver is required
for proper operations under all Microsoft Windows operation systems including Windows
XP / Vista / 7 / 8.
The following procedure will guide you to install VEGA’s ASIO and WDM drivers and ‘USB