9
Since the input impedance of the RCA and XLR ports are designed to be very high
(100K@RCA / 200K@ XLR) to capture music details from the source, we recommended
you to use shielded interconnect cable to avoid noise pick-up from the environment.
z
Analog Outputs
TAURUS PRE provides high level, low distortion audio signal to your power amplifier
though its analog outputs with maximum swing voltages at 24dBu and 30dBu on RCA and
XLR outputs. The XLR outputs are wiring with PIN 2 as hot and RCA outputs at absolute
phase. The measurements indicate TAURUS PRE can easily drive 600ohm load at rated
level without any performance degradation.
Operation
The front panel of TAURUS PRE is shown as following:
1 Power Switch
2
Volume Control Knob
3 Power LED
4
Mode Control Switch
5 Input Channel Switch
6
Remote Control Sensor
7 2*6.35mm Stereo Headphone Jack
NEVER SHORT ANY OUTPUTS OF TAURUS PRE TO GROUND IN-
CLUDING THE HEADPHONE OUTPUTS. FAILED TO DO THAT WILL
DAMANGE UNIT PERMANENTLY AND WILL VOID ANY WARRANTY!