background image

 

Placement and Cabling 

Placement 

ALTAIR should be placed on a solid and stable surface with good ventilation condition. Do 
not install this product near any heat sources such as radiators or other products (such as 
amplifiers) that produce heat. Site the product so that its location or position does not in-
terfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug, 
or similar surface that may block the ventilation openings, or placed in a built in installation 
such  as  a  bookcase  or  cabinet  that  may  impede  the  flow  of  air  through  the  ventilation 
openings. 
 

 

Ventilation Requirement 

 

ALTAIR dissipates up to 30 Watts of power during normal operation. It 

should be installed in a space with at least one inch of clearance above, 

behind and on both sides of its enclosure to provide adequate ventilation. 

Avoid placing it directly above other equipment that produces heat.

 

 

Check Your AC Mains Voltage 

ALTAIR is shipped with its mains voltage preset for operations in the destination country / 
region. The mains voltage setting is written on the back of the unit, besides the power cord 
socket. Mains voltage setting is not intended to be changed by the user. If it needs to be 
changed, contact your dealer or AURALiC.   
 
The power cord has a three-wire grounding type plug (a plug having a third pin for ground-
ing). It will only fit into a grounding type power outlet. If you are unable to insert the plug 
fully into the outlet, contact your dealer or AURALiC. Do not defeat the safety purpose of 
the grounded type plug.   
 

 

ALTAIR MUST BE USED WITH CORRECT 

MAINS VOLTAGE AND PROPERLY EARTHED! 

 

 

Summary of Contents for ALTAIR
























Reviews: