Dimensions of fixtures are approximate and may vary ± 6mm (1/4”). Structure measurements must be verified against the unit to ensure proper fit.
Product images and specifications are for illustrative purposes only, product design may vary.
Installation Manual
ASR1202-OO *** Valve Rough-In
GENERAL INSTRUCTIONS
•
Read this guide carefully and completely before proceeding.
•
It is recommended that you wear safety glasses during the installation.
NOTICE
•
For best results, we recommend that a licensed, professional plumber installs this unit.
•
Please read over these instructions thoroughly before beginning installation.
•
Make sure that you have all tools and supplies needed to complete the installation.
•
Please check local building code.
•
IF SOLDERING, REMOVE CARTRIDGES TO PREVENT DAMAGE
•
Keep receipts (proof of purchase and place of purchase) for this product. The receipt is required should it be necessary to request warranty parts.
MAINTENANCE & CARE FOR YOUR AURA PRODUCTS
•
To clean your faucet or accessory, when necessary, wash with a nonabrasive wet soapy cloth. Then wipe dry with a soft towel or cloth.
•
Do not use any abrasive chemical or corrosive powders, detergents, window cleaners, disinfectants or any other strong cleaners on your Product
as they will destroy the finish and therefore void the warranty
REMOVAL OF FAUCET
•
Always turn the water supply off before removing the existing faucet or disassembling a valve.
•
Ensure the water has been turned off.
•
Open both faucet handles to release water pressure in lines.
U
p
Ho
t
Cold
6
4
6
2
1
3
2
Materials and Tools Required
PHILLIPS
SCREWDRIVERS
PENCIL
LEVEL
WRENCH
THREAD SEALANT
ALLEN KEY
TUBING CUTTER
SOLDER WIRE
PROPANE TORCH
Important Measurements
