Auping K2 77, User Manual

Page: 20 / 102

GB4
2. Safety instructions
■ The K2 mesh base must only be
fitted and connected to the
electricity supply by an Auping
specialist.
■
The K2 mesh base is only suitable
for use in the home.
■ The mesh base has a power-off
switch which switches off the
electricity supply from the mains
when no power is demanded. The
power-off switch is in the plug.
When you press one of the control
buttons, the power-off switch
automatically turns the power on.
The green light on the plug indicates
that power is being used.
■ The K2 mesh base operates on 24
V low-voltage current.
■
Check that the voltage of the
transformer is the same as the
mains voltage in the house.
■
Adjustable beds have moving parts.
Make sure that your limbs cannot
become trapped.
■
Only adjust the bed while you are
lying on it. Make sure that no
children are under the bed while it is
being adjusted.
■ The mesh base is not a toy. Do not
allow children to play with the bed.
■ Do not use the bed as a trampoline
or stepladder.
■
Disconnect the bed from the power
supply before cleaning. Pull the plug
out of the socket.
■
Use an Auping K2 mesh base in
combination with an Auping
mattress.
■
Only place the bed in a dry room. In
view of the electrical components it
is not permitted to place the bed in
a damp room.
■ Make sure that the cables cannot
become trapped. Check this by
adjusting the bed after it has been
installed.
■ Remove the plug from the socket
during a thunderstorm.