Auping Electromat 377, Manual

Page: 18 / 70

Type 388
1. Raise head support
2. Lower head support
3. Raise back section
4. Lower back section
5. Raise foot end
6. Lower foot end
7. Raise head support, back section and
foot end
8. Lower head support, back section and
foot end
Press one of the 'up' or 'down' buttons, hold-
ing it down until the desired position is
reached. Only one button can be operated at
a time.
5. Malfunctions
While an electrical fault may be a nuisance, it
is not dangerous. The motor is fitted with all
necessary safety provisions and has double
insulation.
5.1 Electrical malfunctions
Check that:
- the plug is in the socket;
- the current is switched on at the mains.
5.2 Mechanical malfunctions
Undesirable noises (bed squeaks and creaks)
Unwanted noises are usually caused by mov-
ing parts touching each other.
The reason for this may be a missing part, or
parts that have not been tightened up proper-
ly or have become loose when the bed was
moved.
Check that:
- the bed is properly horizontal;
- the bed is positioned away from the wall;
- there are no unwanted objects in the bed that
should not be there (spoons, forks, pens, etc.).
GB6
fig. 7
_01PPD_3503 BinnenW.pdf - pag.16 June 12, 2008 LET OP !!! Lage resolutie!