Auping Electromat 377, Manual

Page: 16 / 70

■
Make sure that the cables cannot
become trapped. Check this by adjusting
the bed after it has been installed.
■
Remove the plug from the socket during a
thunderstorm.
3. Preparing for use
3.1 Components of your mesh base
- Auping Match mesh base.
- Electric motor with remote control.
Your supplier will install your AVS mesh base
for you. The drive motors should be fitted by
Auping specialists only.
For other parts and detailed installation
instructions, we refer you to the installation
cards included with the various parts.
3.2 Attachment of the handset
In order to easily attach the handset to the sur-
round.
Place the clamp on the underside of the side
panel of the surround (see fig. 4).
Click the handset into the clamp.
3.3 Fitting the mattress
Put your bed in the horizontal position. Put the
mattress on the mesh base and centre it.
Make sure that the five protruding clip-on pins
of the anchors are pushed widthways into the
mesh (see fig. 5).
GB4
fig. 4
fig. 5
_01PPD_3503 BinnenW.pdf - pag.14 June 12, 2008 LET OP !!! Lage resolutie!