13
Figure 8: The Minimum Bend Radius of the Cable
The cable may be applicable for outdoor use and resistant to ultra-violet radiation but the
cable should be protected from direct sunlight or immersion in water. When necessary,
sunlight resistant cable trays or cable ties can be used to fix the cable at suitable positions
(please avoid damage or heavy pressure on the cable during fixture).
3.1 Module Grounding Method
The Module must be grounded properly to ensure the safety of personnel and the work
environment. Please connect grounding in accordance with IEC Standards or the electrical
codes and regulations of the site/country of installation to ensure that the Module is correctly
grounded.
The grounding holes on the Module frame are marked with grounding symbols (as indicated
in Figure 9; the quantity, size and position of grounding holes are different for each model;
please refer to the corresponding Module Data Sheet for detailed information). Please use
the grounding holes on the Module frame for grounding. It is strictly forbidden to drill
additional holes that may damage the frame.