Connecting To The Display
Inputs/Outputs
Quick Start Guide
PFSDM32/PFSDM43/PFSDM50/
PFSDM55 Series
(P320HVF06/P430HVF07/
P500HVF04/P550HVF16 Series)
Item
Description
6
DVI
Connects with the digital video output of a computer and
other devices.
3
Power Switch
Switches the main power on/off.
1-1
1-2
See “Keypad” for detailed information.
Keypad
2
Disperses heat from the display.
Air Vents
5
RS232
Connects with the serial IO connector of another device.
7
HDMI
Connects with devices transmitting audio/video using the
HDMI interface.
8
VGA
Connects with the analog video output (VGA) of a
computer, etc.
Connects with the audio out connector of a video source
such as a computer, VCR, or DVD player when the display is
connected to the source via the VGA or DVI connector.
9
AUDIO IN
4
AC-IN
Connects with the supplied power cord.
CAUTION:
Avoid applying force or using sharp objects on
the screen or the frame around the screen at all times.
CAUTION:
Never press or place anything on the back cover.
This may damage the internal parts of the display.
11
IR IN
Connects with an external IR sensor module.
NOTE:
From the tip to the terminal the plug
sections are defined as IR / VCC / Ground.
10
AUDIO OUT
Connects with external speakers or audio amplifier to
output the audio that is supplied by the video source.
NOTE:
Headphones and earphones are not
supported.
12
DP
(DisplayPort)
Connects with devices transmitting audio/video using the
DisplayPort interface.
NOTE:
The DisplayPort input function will be
disabled if a Smart Display Module (SDM) is installed
in the display.
13
IR Sensor and
Power LED
Receives the signal from the remote control.
Indicates the power status of the display.
Green
Red
Off
The display is powered on.
The display is in stand-by mode.
The display is powered off.
Digital Connection
Analog Connection
Safety Information
Carrying the Display
When carrying the display, always carry it
using both hands and with the LCD panel
facing forward. DO NOT carry the
display while putting pressure on the
screen at the front of the chassis.
Placing the Display
When placing the display, always put the screen face
down as illustrated in the Setting Down the Display
section. Never stand the display upright. Never tilt the
display towards the left, right or balanced on a single
corner of the frame.
Setting Down the Display
When setting the display down, place the
screen face down on a flat and stable surface
covered by a protective sheet and a table
cushion as shown in the illustration provided.
50”
32”43”55”
2
5
6
7
8
10
11
9
3
4
13
1-1
12
1-2
