7
INSTALLATION
The camera has 2 installation types: desktop
and wall mount installations (optional).
Desktop Mount Installation
1.
Put the camera on a flat surface. In case
the camera has to be placed on an
inclined surface, make sure the cline
angle is less than 15 degrees to ensure
proper pan /tilt operation.
Wall Mount Installation
(
Optional)
1.
According to diameter and position of the
4 installation holes (As shown below) on
the bracket, drill 4 holes on the wall and fix
the bracket onto the wall by using 4
screws which should be prepared by you.
2.
Before fixing the camera, set the DIP
switches of the camera correctly.
Note
Take effective measures to avoid
camera from dropping.
Do not grab the camera head when
carrying.
Do not rotate the camera head with
hand. It may cause malfunction to the
camera.
Note
Make sure the installed place is strong
and safe enough to hold the camera
and relative parts, it is suggested that
the installed place can withstand 4
times the weight of the camera and its
relative parts.
