1
- Listen for clicks. Pull on buckle to verify it is
latched.
2
- Snap the chest clip together and temporarily
slide towards buckle for tightening of harness.
3
- Tighten harness by pulling on the adjuster
strap. Pull any excess harness webbing through
the buckle towards the child’s shoulders and
pull on the adjuster strap. This may need to be
repeated several times for proper fit.
Verify that the harness is snug around the
child’s waist and shoulders.
4
- Position the chest clip at child’s armpit level.
Check that Child is Secure
Buckle is fastened.
Harness straps are not twisted.
Harness is snug – A snug harness cannot be
pinched, and should not allow any slack.
Chest clip is level with armpits.
Harness straps must be
at or just below
child’s
shoulders to avoid injury. If harness slots need
to be moved, see Shoulder Belts section.
Make sure that nothing interferes with the
harness. Make sure harness is snug around
child and lays flat. Serious injury or death could
occur to a child that is not secured properly.
If child is not secured properly, child could
be ejected in a sudden stop or crash, resulting
in serious injury or death.
click
1
2
3
4
28
PIPA instructions
29
PIPA instructions
click
