auna 10036452, Manual

Page: 55 / 144

55
EN
TROUBLESHOOTING
The following checks will help troubleshoot most problems that may occur
with your device. Before going through the following checklist, you should
first check that the power supply unit has been connected correctly. If the
problem persists after the checks listed below, contact the manufacturer,
customer service or an authorised service centre for maintenance and
repair.
Problem Possible cause Solution
Radio reception
No radio reception
The mode selector has
not been set to the
correct position.
Set the desired volume
with the VOLUME
knob.
Rotate the Tuning
knob to search for a
radio station.
CD playback
CD does not play or
sound skips.
The CD was inserted
incorrectly.
Insert the CD into
the CD tray with the
labelled side facing up.
The CD is dirty.
Clean the CD. Restart
the device.
Sound skips
Change the installation
location.
Press the STANDBY
button (restart the
device).
The CD player is not
working.
Press the STOP button
and then save the
desired tracks.
General
The CD memory list
cannot be played.
The mains plug is not
inserted in the socket.
Insert the mains plug
correctly into the
socket.
Press the STANDBY
button (restart the
device).