auna 10035303, Manual, Page: 46 / 146

46
EN
PROGRAM function
This function allows music tracks to be played in a programmed sequence.
Program function can only be set in STOP mode
1. Press the PROGRAM button once. Program Number 01 will display and
PROGRAM INDICATOR will flash.
2. Press the SKIP FORWARD or SKIP BACKWARD button to select the track
to be programmed.
3. Press the PROGRAM button again to store the selection. The Program
number. will advance to 02 to prompt for the next input.
4. You may repeat steps #2 to #3 to program up to 20(CD)/99(MP3) tracks.
As soon as you have entered the 20th track, the LED DISPLAY will show
“FUL”,indicating that program is full..
5. Press the PLAY button to complete and start program play. Press STOP
button to stop program play.
6. You may use the REPEAT function to repeatedly play a certain track
(Repeat 1) or all tracks (Repeat All) in the Program Play Mode.
7. The CD player will stop when all the programmed tracks have been
played through once. To repeat program play, press the PLAY/PAUSE
button.
8. To cancel program play, press the STOP button twice while program play
is running or open the CD DOOR in stop mode.
Up to 20 (CD)/99(MP3) tracks can be programmed. If you attempt to
program more than 20(CD)/99(MP3) tracks, “FUL” will appear in the LED
DISPLAY and “PROG FULL” will appear on the TV screen as shown below (if
connected).