24
EN
SAFETY INSTRUCTIONS
Note
: Because CD movement and sensitive circuitry can cause
interference with nearby equipment, turn off the equipment if you intend
to use other electrical equipment in the vicinity.
• All safety and operating instructions must be followed.
• Do not use the unit near water or moisture.
• Make sure that no liquid is spilled over the device or the openings in the
device.
• Move the unit carefully to avoid electric shock.
• Do not block the ventilation openings of the unit.
• Do not place the unit near any heat sources (such as heaters) or expose
it to direct sunlight.
• Plug the appliance into a wall outlet according to the operating
instructions.
• This equipment is equipped with an overheat protection (safety device).
If it needs to be replaced, contact the manufacturer, customer service or
a similarly qualified person.
•
To clean the unit, follow the instructions in the „Cleaning and Care“
section.
• Unplug the appliance from the wall outlet when not in use for an
extended period of time.
•
The unit must be repaired by a qualified person if:
- the power plug or cord is damaged,
- foreign objects or liquid have entered the openings of the device,
- the device has been exposed to rain,
- the device does not function properly without external changes,
- the unit is dropped and the subwoofer is broken.
• Do not attempt to repair the unit yourself as this will void the warranty.
• The power plug is used as a disconnect switch and should be easily
accessible at all times.
•
To prevent accidents, the unit must be securely fastened to the floor or
wall in accordance with the installation instructions.
• The device is a Class I laser product.
