A) RECORDING MODE
I
) CD RECORDING
i) MANUAL RECORDING
1) PRESS
THE
“
CD
I
/AUX “ FUNCTION BUTTON.
2)
PLACE THE PRE-RECORDED MUSIC CD INSIDE THE
CD
I
COMPARTMENT BUT DO NOT PRESS “PLAY”.
3)
SET THE “ AUTO/MANUAL “
FUNCTION. (
PLEASE REFER TO PART B-
II
)
4) PRESS
THE
“REC “ BUTTON (20) AND THEN THE CD “ PLAY/PAUSE
” BUTTON (15) OF
CD
II
UNTIL
THE PLAY INDICATOR “ “ SHOWS ON THE LCD DISPLAY (2).
5)
AFTER A FEW SECONDS, THE LCD (2) WILL SHOW THE TIME COUNTER - THE SYSTEM IS NOW STARTING
THE RECORDING PROCESS. NOW START PLAYING OF THE CD IN
CD
I
.
6)
AFTER RECORDING HAS FINISHED, PRESS THE “ STOP
” BUTTON (30) AT
CD
II
AND THEN STOP
PLAYBACK OF
CD
I
.
II
) PROGRAMMED ENCODING
1) PRESS
THE
“
CD
I
/AUX “FUNCTION (32) BUTTON.
2)
PLACE THE RECORDED MUSIC CD INSIDE THE
CD
I
COMPARTMENT BUT DO NOT PRESS “PLAY”.
3)
SELECT THE DESIRED TRACKS BY FOLLOWING “
CD DISC PROGRAMMING
“ PROCEDURES.
4)
REPEAT THE SAME PROCEDURE FROM STEP 2 TO 5 AS DESCRIBED IN PART
A-
I
-i
ABOVE (MANUAL
RECORDING) TO COMPLETE THE RECORDING.
II
) VINYL RECORDING (FROM PHONO)
1)
PRESS THE “PHONO” FUNCTION BUTTON (32).
2)
PLACE THE RECORD TO BE RECORDED ON THE TURNTABLE AND GET READY FOR PLAYBACK AS
DESCRIBED PREVIOUSLY.
3)
SET THE “ AUTO/MANUAL “
FUNCTION. (
PLEASE REFER TO PART B-
II
)
4) PRESS
“REC “ BUTTON (20) AND THEN THE CD “ PLAY/PAUSE
” BUTTON (15) AT
CD
II
UNTIL THE
PLAY INDICATOR “ “ SHOWS ON THE LCD DISPLAY (2).
5)
AFTER A FEW SECONDS, THE LCD (2) WILL DISPLAY THE TIME COUNTER AND THE SYSTEM WILL START
THE RECORDING PROCESS. NOW START PLAYING OF THE VINYL RECORD.
6)
WHEN FINISHED RECORDING, PRESS THE “ STOP
” BUTTON (30) AT
CD
II
AND THEN STOP THE
RECORD PLAYING.
III
) CASSETTE RECORDING (FROM TAPE)
1)
PRESS THE “TAPE” FUNCTION BUTTON (32).
2)
GET THE TAPE READY FOR PLAYBACK AS DESCRIBED PREVIOUSLY.
3)
SET THE “ AUTO/MANUAL “
FUNCTION. (
PLEASE REFER TO PART B-
II
)
4) PRESS
“REC “ BUTTON (20) AND THEN THE CD “ PLAY/PAUSE
” BUTTON (15) AT
CD
II
UNTIL THE
PLAY INDICATOR “ “ SHOWS ON THE LCD DISPLAY (2).
5)
AFTER A FEW SECONDS, THE LCD (2) WILL SHOW THE TIME COUNTER AND THE SYSTEM WILL START THE
RECORDING PROCESS. NOW START PLAYING OF THE CASSETTE TRACK(S) YOU WISH TO RECORD.
6)
WHEN FINISHED RECORDING, PRESS THE “ STOP
” BUTTON (30) AT
CD
II
AND THEN STOP THE
CASSETTE TAPE PLAYING.
IV
) AUX-IN RECORDING
1) PRESS
THE
“
CD
I
/AUX “FUNCTION (32) BUTTON.
2)
CONNECT YOUR AUDIO DEVICE TO THE AUX-IN JACK (10) VIA A 3.5 MM CONNECTING CABLE (NOT
SUPPLIED).
3)
REPEAT THE SAME PROCEDURE AS DESCRIBED IN STEPS 3 TO 5 OF PREVIOUS SECTIONS.
NOTES:
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF THE PLAYING
SOURCE
-
TO SUSPEND THE RECORDING PROCESS, PRESS THE “ PLAY/PAUSE
” BUTTON (15) AT
CD
II
,
“bUSY“ BRIEFLY APPEARS ON THE LCD DISPLAY AND THE RECORDING WILL PAUSE. TO RESTART, PRESS
THE “ PLAY/PAUSE
” BUTTON (15) AGAIN.
B) RECORDING SETTINGS
I
) RECORDING LEVEL
THE PRESET RECORDING SOUND LEVEL OF THE SYSTEM IS LOWER THAN THAT OF THE ORIGINAL MUSIC
SOURCE IN ORDER TO AVOID DISTORTION DURING RECORDING.
II
) AUTO(MATIC) OR MANUAL TRACK SEPARATION ( )
DURING RECORDING, YOU CAN SEPARATE THE MUSIC TRACKS (FROM CD/AUX/TAPE OR VINYL) IN EITHER
“AUTO MODE” OR “MANUAL MODE”.
E-6
