NOTES:
-
MAKE SURE THE DIRECTION IS CORRECT WHEN INSERTING THE TAPE INTO THE
SYSTEM (REFR TO LINE DRAWING).
-
SOME NOISE CAN BE HEARD DURING SEARCHING AND NORMAL PLAYBACK IS NOT
POSSIBLE DURING FAST FORWARDING.
-
IT IS RECOMMENDED THE CASSETTE TAPE IS REMOVED FROM THE PLAYER AFTER
LISTENING AND THAT THE CASSETTE TAPE IS NOT LEFT INSIDE THE SYSTEM WHEN
THIS IS NOT BEING USED.
CASSETTE CARE
TWO COMMON CAUSES OF TROUBLE EXPERIENCED WHEN USING CASSETTES ARE:
1. TAPE JAMMING - LEADING TO UNEVEN SPEED DURING PLAYBACK.
2. TAPE ENTANGLING - WHEN THE TAPE WRAPS ITSELF AROUND VITAL PARTS OF
THE MECHANISM.
TO AVOID THESE PROBLEMS OCCURRING, TAKE THE FOLLOWING PRECAUTIONS:
•
CHECK THAT THERE ARE NO LOOSE LAYERS OF TAPE VISIBLE THROUGH THE
CASSETTE CENTRE WINDOW (SEE FIG. 1).
•
TAKE UP ANY LOOSE LAYERS, USING A PENCIL OR HEXAGONALLY BARRELLED
BALLPOINT PEN, BEFORE INSERTING THE CASSETTE (SEE FIG. 2).
NOTES:
IF THE CASSETTE FEELS TIGHT WHILST PERFORMING THIS OPERATION
(SEE FIG. 2), THE TAPE MAY BE JAMMING DUE TO RIDGES FORMED IN THE WINDING
OF THE TAPE (VISIBLE THROUGH THE CENTRE WINDOW). IN MOST CASES, THESE
MAY BE REMOVED BY FAST REWINDING OF THE CASSETTE FROM ONE END TO THE
OTHER AND BACK AGAIN. WE RECOMMEND YOU USE ONLY WELL-KNOWN BRANDS
OF TAPE. DO NOT EXPOSE CASSETTES TO DIRECT SUNLIGHT, DUST OR OIL, AND
DO NOT TOUCH THE TAPE SURFACES.
PLAYING A COMPACT DISC IN CD
I
THE SYSTEM IS EQUIPPED WITH 2 CD PLAYERS, THE SECTION BELOW DESCRIBES THE FUNCTION FOR
:
CD
I
z
GETTING STARTED
1. PRESS
“
CD
I
/AUX “ FUNCTION BUTTON (32).
2. PRESS THE “OPEN/CLOSE” BUTTON
S
(13) TO OPEN THE CD DOOR (12).
3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CD DOOR
S
(13).
4. THE UNIT WILL READ THE CD, AND THE LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF CD TRACKS.
z
PLAY / PAUSE MODE
1. IF
THE
PLAY/PAUSE
BUTTON (15) IS PRESSED, WHILE THE CD IS NOT PLAYING, THE FIRST TRACK
WILL START PLAYING.
2. IF
THE
PLAY/PAUSE
BUTTON (15) IS PRESSED DURING PLAYBACK, THE MUSIC WILL PAUSE AND THE
PLAY INDICATOR “ “ WILL START FLASHING ON THE LCD DISPLAY (2). PRESS AGAIN TO RESUME
NORMAL PLAYBACK.
z
STOP MODE
1. IF
THE
STOP BUTTON (16) IS PRESSED WHILE THE MUSIC IS PLAYING OR WHEN THE MUSIC HAS BEEN
PAUSED, THE CD WILL STOP PLAYING AND THE TOTAL NUMBER OF TRACKS WILL SHOW ON THE LCD
DISPLAY (2).
z
SKIP MODE (SKIP UP
/SKIP DOWN
)
1. DURING PLAY OR PAUSE MODE, IF THE SKIP UP
BUTTON (17) IS PRESSED, THE SYSTEM WILL SKIP TO
THE NEXT TRACK AND DISPLAY THE TRACK NUMBER – THE CD WILL CARRY ON PLAYING THAT TRACK OR
STAY IN PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF THE SKIP DOWN
BUTTON (17) IS PRESSED, THE SYSTEM WILL
SKIP BACK
TO THE BEGINNING OF THE TRACK
THAT IS PLAYING. THE SAME TRACK NUMBER IS
DISPLAYED AND CONTINUES PLAYING OR STAYS IN PAUSE MODE.
3. AFTER STEP 2, PRESS THE SKIP DOWN
BUTTON (17) AGAIN, THE SYSTEM WILL SKIP TO THE
PREVIOUS TRACK AND PLAY THAT TRACK OR STAY IN PAUSE MODE, UNTIL PLAY/PAUSE IS PRESSED.
E-4
