Brief instruction of control
Front Panel
1. Standy/ON Switch:
Press this switch to turn the unit on or off remote sensor.
2. Receiver Singal Head
3. Speaker A/B Selector:
Press this switch to select speaker A,speaker B or speaker AB.
4. Loudness Selector:
Press this switch to turn loundness on or off.
5. Headphone:
Insert Headphone plug.
6. Bass+/-:
Adjust the unit bass volume level.
7. /-:
Adjust the unit treble volume level.
8. Volume:
Adjust the unit volume level.
9. Midrange:
Adjust the unit midrange volume level.
10. Balance:
Adjust the unit balance volume level.
11. Phone:
Select Phono input mode.
12. CD:
Select CD input mode.
13. DVD:
Select DVD input mode.
14. Aux:
Select Aux input mode.
15. Tuner:
Select TUNER input mode.
Rear Panel
1. FRONT SPEAKER (B) TERMINAL:
Connect to front speaker(B), the
impedance equal or more than 8-16 OHM.
2. FRONT SPEAKER (A) TERMINAL:
Connect to front speaker(A), the
impedance equal or more than 8-16 OHM.
3. REC AUDIO INPUT JACK:
Connect to
REC signal output jack.
4. TUNER AUDIO INPUT JACK:
Connect to
TUNER signal output jack.
5. AUXAUDIO INPUT JACK:
Connect to
AUX signal output jack.
6. DVD AUDIO INPUT JACK:
Connect to
DVD signal output jack.
7. CD AUDIO INPUT JACK:
Connect to CD
signal output jack.
8. PHONO AUDIO INPUT JACK:
Connect to
PHONO signal output jack.
9. GROUND OF PHONO:
Connect to ground
of phone.
10. POWER SWITCH:
Turn on and off the unit
power switch.
11. AC INPUT(230V....,50Hz)
7
