13
Listening to Radio
Manual tuning
1. Select the desired band by radio band selector (16) (FM or FM-stereo).
2. Tune to the required station by turning the tuning knob (21).
3. Adjust volume knob (7,8) to the desire volume level.
FM & FM-stereo reception
•
Set the “Band/FM-St “ selector (16) at “ FM ” position. Programs are received in mono mode. In
particular when stereo signals are weak. It is preferable to receive the program in mono.
•
Set the “Band/FM-St “ selector (16) at “FM-St” position for receiving stereo programs. The “FM-St”
LED indicator (19) will light up to show FM stereo program is receiving.
Hints for best reception:
FM : The receiver has a build-in FM wire antenna hanging at the rear cabinet. This wire should be
totally unraveled and extended for best reception.
Playing Compact Disc
getting start
1. Slide the Function selector (16) to select “ CD/USB/SD ” mode.
2. Press “Open/close” button (11) to open the CD door (10).
3. Place a CD with the printed side facing up inside the tray & then close the CD door.
4. Focus search is performing, the LCD display (18) will show the total number of tracks & total
playing time.
Play / pause / stop mode
/
1. Press the “ Play/pause/stop ” button (2) to start playback, the first track will start playback.
2. To interrupt, press the “ Play/pause/stop ” button (2) once, the playing time will be freeze and
flashing on the LCD display (18). Press again to resume normal playback.
3. If press and hold the “ Play / pause stop “ button (2) for over 2 seconds during playback mode.
The system will go to stop mode.
Skip/search mode (skip/search up
/ skip/search down
)
1. During play or pause mode, if “skip up” button (3) is pressed. It will go to next track and display
the track no. And then remain the play or pause mode.
2. During play or pause mode, if “skip down” button (3) is pressed. It will go back to the beginning
of the track, original track no. Is display and remain the play or pause mode.
3. After step 2, press “skip down” button (3) again will go to the previous track and remain the play
or pause mode.
4. If press and hold the “ skip up/down button “ (3) during cd/mp3 playback, the playing track will go
fast forward or backward until the button being released.
For MP3 disc
1. Press “ Folder up “ button (4), the folder nr. will goes up
2. Press “ Skip up “ or Skip down (3) button, the track no. Change.
3. When the desired track is being selected, press the CD “ Play/pause/stop ” button (2) to start
playback.
ID3 (track/album title) function (by remote handset)
1. Press the “ Info “ button during playback of mp3 disc, the song title is being displayed. Press the
“ Info ” button again to disable the function.