Figure 56: Information in the status bar (top)
[1]
Operation mode
[2]
Error symbol (only for faults and warnings)
[3]
ID number: S = Status page
Navigation support
If further details or information are available with reference to the displayed code,
the following indications
Details
or
More
appear in the navigation support (bottom
display line). Then, further information can be displayed via push button .
Figure 57: Navigation support (bottom)
[1]
shows list with detailed indications
[2]
shows further available information
The navigation support (bottom row) is faded out after approx. 3 seconds. Press any
push button (selector switch in position 0 (OFF)) to fade in the navigation support.
8.2.1.
Feedback indications from actuator and valve
Display indications depend on the actuator version.
Valve position (S0001)
●
S0001
on the display indicates the position in °.
●
The bargraph display appears after approx. 3 seconds.
Figure 58: Valve positioning and position
The bargraph signals the position 0.0°. After commissioning, this is the homeport
(zero position). If 360.0° are reached, the bargraph is completely filled. After approx.
3 seconds, the display returns to 0.0° and the bargraph is completely empty.
Figure 59: Bargraph for 9° and 360°.
Torque (S0002)
●
S0002
on the display indicates the torque applied at the actuator output.
●
The bargraph display appears after approx. 3 seconds.
54
SAVEx 07.2 – SAVEx16.2/SARVEx 07.2 – SARVEx16.2 Control unit: electronic (MWG)
Indications
ACVExC 01.2 Non-Intrusive
