3.
Turn handwheel in desired direction.
→
To close the valve, turn handwheel clockwise:
➥
Drive shaft (valve) turns clockwise in direction CLOSE.
Figure 41:
6.1.2.
Manual operation: disengage
Manual operation is automatically disengaged when motor is started again. The
handwheel does not rotate during motor operation.
6.2.
Motor operation
Valve damage due to incorrect setting!
→
Perform all commissioning settings and the test run prior to motor operation.
Controls are required to operate an actuator during motor operation. If the actuator
is to be operated locally, additional local controls are required.
1.
Switch on power supply.
2.
To close the valve, switch on motor operation in direction CLOSE.
➥
Valve shaft turns clockwise in direction CLOSE.
40
SAEx 25.1 – SAEx 35.1 / SAREx 25.1 – SAREx 30.1
Operation
NORM (without controls)
