manualshive.com logo in svg

AUMA PROFOX PF-M100X, Manual

Share
Download
AUMA PROFOX PF-M100X Manual Download Page 25

The end positions may also be set using the AUMA Assistant App or the AUMA
CDT software.

Valve damage at valve/gearbox due to incorrect setting!

→

When setting with motor operation: Interrupt operation in time prior to reaching
the end stop.

→

Heed overrun when selecting actuator seating via positions.

7.1.1.

Set end position CLOSED

Electric shock due to presence of hazardous voltage!

Failure to observe this warning results in death or serious injury.

→

Electrical connection and commissioning must be carried out exclusively by
suitably qualified personnel if circuit is live.

→

Do not touch any cables.

1.

Remove cover from actuator.

2.

Operate in direction CLOSE via push button   until complete valve closing.

Risk of passing set end positions!

→

During operation in directions OPEN/CLOSE, the actuator stops when reaching
the set end position. When pressing again the button, the actuator runs until
reaching a mechanical stop (end stop of the actuator or the valve) or passes
the end position when releasing the button.

➥

The operation in direction CLOSE is signalled by the LED flashing in red.

3.

Once the desired end position CLOSED has been reached, release the push
button  .

➥

The LED continues flashing in blue for approx. 10 seconds. This time span al-

lows for end position setting.

25

PF-M25X – PF-M100X 
Parallel 

Commissioning

Summary of Contents for PROFOX PF-M100X

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands