AUMA FQM, Operation Instructions Manual, Page: 14 / 36

3. Place coupling [1] onto valve shaft [2] and secure against axial slipping by using
a grub screw [3] or a washer and a screw [4]. Thereby, ensure that dimensions
X, Y or L are observed (refer to figure and table <Mounting positions for coup-
ling>).
Figure 10: Examples: Fit coupling
[1] Coupling
[2] Valve shaft
[3] Grub screw
[4] Screw with washer
Figure 11: Mounting positions for coupling
Table 6:
FQM 12.1 FQM 10.1 FQM 07.1 FQM 05.1 Dimensions
[mm]
F14 F12 F12 F10 F10 F07 F07 EN ISO 5211
6 6 6 6 5 5 5 X max.
10 10 10 10 5 5 5 Y max.
100 60 60 100 45 45 45 L max.
4. Apply non-acidic grease at splines of coupling (e.g. Gleitmo by Fuchs).
14
FQM 05.1 – FQM 12.1 / FQMEx 05.1 – FQMEx 12.1
Assembly