AUMA AUMATIC ACExC 01.2, Operation Instructions Manual, Page: 30 / 92

6.3 Menu navigation via push buttons (for settings and indications)
Menu navigation for display and setting is made via the push buttons [1 – 4] of the
local controls.
Set the selector switch [5] to position 0 (OFF) when navigating through the menu.
The bottom row of the display [6] serves as navigation support and explains which
push buttons [1 – 4] are used for menu navigation.
Figure 30:
[1–4] Push buttons or navigation support
[5] Selector switch
[6] Display
Table 7: Important push button functions for menu navigation
Functions Navigation sup-
port on display Push buttons
Change screen/selection Up ▲
[1]
Change values
Enter figures from 0 to 9
Change screen/selection Down ▼
[2]
Change values
Enter figures from 0 to 9
Confirm selection Ok
[3]
Save Save
Enter <Edit> menu Edit
Display more details Details
Enter Main menu Setup [4] C
Cancel process Esc
Return to previous display
Backlight
●
The display is illuminated in white during normal operation. The backlight turns
to red under fault conditions.
●
The screen illumination is brighter when operating a push button. If no push
button is operated for 60 seconds, the display will become dim again.
6.3.1 Menu layout and navigation
Groups The indications on the display are divided into 3 groups:
30
SGExC 05.1 – SGExC 12.1 Control unit: electromechanic
Operation ACExC 01.2 Intrusive Modbus RTU