20
Display Unit Power Off
Step 1:
Press the Power button for at least three (3) seconds until a message
displayed.
Step 2:
Choose “Power off” to turn off the Display Unit.
Display Unit Powering
The Display Unit is meant to be used with the charging adaptor ALWAYS plugged in. If
the Display Unit is disconnected from the charging adaptor accidentally, proceed
with the following steps to charge and power the Display Unit. The Display Unit will
alert the user when the Display Unit itself is low on battery.
Step 1:
Plug the Type-C end of the charging adaptor into the Display Unit.
Step 2:
Attach the wall adaptor to a power outlet.
Step 3:
Place the Display Unit on the stand provided.
NOTE:
You may also tap on the “SLEEP” button to enter the sleep mode.
CAUTION!!!
Only use adaptors supplied or manufactured by Taiwan Aulisa Medical
Devices Technologies, Inc.
