- 03 -
Charging
Fully charge this speaker before first use. Connect it to a USB charger or charging
port with the included micro-USB cable to charge. When the red LED charging
indicator turns green, your speaker is fully charged and ready for use. Charging
takes around 3 hours.
Powering On / Off
●
Turn the power switch on and the LED indicator will flash white
●
Turn the power switch off and the LED indicator will turn off
Pairing
1. When you turn on the speaker, the speaker will automatically enter pairing
mode and the LED indicator will flash white rapidly
2. Activate the pairing function on your phone or other pairing-compatible
device and select “AUKEY SK-M31”
3. If a code or pin is required for pairing, enter “0000”
4. When successfully paired, the LED indicator will stay white
Notes
●
The speaker will automatically shut down after 10 minutes in pairing mode if
no devices are paired
●
If your paired device is switched off or manually disconnected, the speaker
will enter pairing mode and automatically shut down after 10 minutes
●
If the speaker or connected device exceeds the operating range, the speaker
will disconnect. The connection to the last successfully connected device will
be re-established once you re-enter wireless range within 10 minutes. To connect
to other devices, please repeat the previous “Pairing” steps
Playing Audio via Aux Connection
Connect the SK-M31 to your PC, laptop, or other devices with Aux output using
the included 3.5mm audio cable. Turn on the speaker and the LED indicator will
light up solid blue.
Notes
●
The speaker will disconnect from your phone or other paired devices when
an audio cable is plugged into the Aux in jack. Unplug the audio cable or
press mode button twice to switch back to wireless mode
●
When playing audio using the Aux in jack, short-press the / - to
adjust the volume and short press play/pause to play or pause. Next / Previous
track control on the speaker is disabled in Aux mode
●
For some computers, you may need to access the audio control panel to
manually set the speaker as the default audio device
Playing Audio via microSD Card
Turn on the speaker. Insert a microSD card into the microSD card slot, and the
LED indicator will light up solid blue. The speaker will automatically play music
from the microSD card.
Note
●
When you take out the microSD card, the speaker will automatically enter
wireless pairing mode
FM Radio Mode
Turn on the speaker and press mode button once to switch to FM radio mode.
Long-press play/pause to automatically tune the speaker into nearby radio
stations, and the LED indicator will flash blue rapidly. After tuning is complete,
the LED indicator will light up solid blue. Long-press / - to switch
between available radio stations.
Notes
●
To enhance the FM signal, plug one end of the micro-USB cable or audio
cable into the speaker (as an antenna) leaving the other end unplugged
●
Press play/pause in FM mode to play or mute
●
Press mode button in FM radio mode to return to wireless pairing mode
