User and Technical Manual: HotDog Temperature Management Controller
Page 7
4.
Control Warming Devices using the touchscreen.
•
Plug in a Warming Device to begin. When the
cable is properly inserted into the Controller, an
audible sound indicates that the Device is
properly connected, and its port icon illuminates
on the screen.
•
Touch the illuminated icon to activate.
•
The Warming Device highlighted in green is the
currently selected Device. To select its
temperature, use the + thermometer to increase
the temperature or the – thermometer to
decrease the temperature. Turn off the
highlighted port at the red power icon.
•
Each connected Warming Device can be
adjusted separately. Other icons to the right
adjust all port temperatures simultaneously:
•
All High
•
All Medium
•
All Low
•
All Off
5.
If using a temperature probe and you wish to engage AUTO mode, see the instructions on pages 8 and 9.
6.
When patient warming therapy is complete, turn the Mains Power Switch to OFF.
7.
After use, disconnect the Controller from the electrical outlet.
