USER’S MANUAL
25
USER INSTRUCTIONS
CHRONOGRAPH AUTOMATIC
Movement AR.1350
(Fig. 12)
ATTENTION: Before to start to set the date
❹
, be sure the mechanism of the
watch is not already itself in the process of changing the date. You could dam-
age the movement while doing this. For this reason, never change the date/
day when the hour hand
❶
of the watch is located between 9 p.m. and 3 a.m.
SETTING THE TIME
Pull the crown out to position
III
(the second hand
❸
will stop running)
and turn the crown counter-clockwise. Move the hour hand
❶
forward over
12 o’clock until the date changes. Now you know the watch has it’s midnight
position (while the date will be changed). Move the hands forward to the
actual time you want to set. Be aware if you move some hours the watch will
show morning time and if you move once again over 12 o’clock, the watch
shows afternoon time. When time is set, push the crown in position
I
and
the time will start to work. You can see the second hand
❸
moving again.
QUICK CORRECTION OF THE DATE* AND DAY*
Before to start to set the date
❹
, be sure the mechanism of the watch is
not already itself in the process of changing the date. You could damage the
movement while doing this. For this reason, never change the date when the
hour hand
❶
of the watch is located between 9 p.m. and 3 a.m. Otherwise,
first move the hour hand
❶
in the bottom part of the watch dial between
3 o’clock and 9 o’clock.
Pull the crown out to position
II
. Turn it clockwise to change the date. For
models with day indication you can turn counter-clockwise to adjust the
correct day.
Push the crown in, to position
I
, to put the watch in normal use mode (and
tighten it back down on models with a screwed crown).
* Some of the watches are equipped with date and some with day/date indi-
cation
