English
5.8 Hands-free Calling
(Bluetooth Connection Only)
When connected through Bluetooth to a mobile phone, the
Venus will act as a hands-free system for any calls. The music
will stop when you receive an incoming call and will resume
once the call is finished.
•
Press to answer an incoming call or to end an
existing call.
•
Press and hold to reject an incoming call.
•
Use + and – to adjust the volume.
5.9 Audio-In
Use the provided audio cable to connect your source device to
the speaker.
Once the audio cable is plugged in, the speaker will
automatically enter the audio-in mode.
6. Charging
Connect the speaker to a powered USB port using the
provided USB power cable. While charging, the Status LED
will light red and will go off once the battery is fully charged. A
full charge takes approximatively 7 hours depending on the
power input.
7. Troubleshooting
Problems
Solutions
Unable to switch on • Fully charge the Speaker
• Switch speaker on
Unable to connect
to the speaker via
Wi-Fi
• Ensure the Wi-Fi environment is 2.4 GHz
• Ensure the speaker is in Wi-Fi mode
• Ensure that both your device and the
speaker are in the same network.
• To add a new speaker, please refer to
section 5.1.
• Use a pin to press and hold the reset button
inside the audio socket for 10 seconds to reset
to factory settings, then try again.
Unable to pair my
Bluetooth source
device
• Confirm that the speaker is in pairing mode.
• Confirm that the speaker is within 10m of
the source device
• Delete existing connection to speaker
from source device and repair.
• In Bluetooth mode press and hold for 3
seconds to switch the speaker into pairing
mode.
Can't install the
Bluetooth driver
for the speaker
on a computer
• For Windows 7 and 8, update the
Bluetooth driver from the Bluetooth
module manufacturer's website. For
further information on you PCs Bluetooth
module, please consult your PC supplier.
Bluetooth speaker are not supported by
Windows XP and Vista, a third party
Bluetooth driver can be used to solve
this issue.
•
There is no sound
from my Bluetooth
audio device
• Make sure the Bluetooth audio device is
connecting to the speaker via Bluetooth.
• Check the volume on both source device
and your audio device.
No sound or
intermittent sound
in Wi-Fi mode.
• Ensure the Wi-Fi strength is good
• Reduce the audio quality in the app
• Reduce the usage of the router
-24-
-23-
