Auerswald COMfortel WS-Base, Instructions Manual, Page: 22 / 24

Commissioning
22
COMfortel WS-Base - Instructions V05 08/2017
4.
Under NTP , enter the NTP server's IP address in the Server
entry field.
5.
Select the time zone from the Time zone list field.
6.
Click Save > OK > Reboot now > OK .
This restarts the WS-Base. If the WS-Base gets its IP
address automatically from a DHCP server, it connects
automatically to the IP-DECT Server.
7.
Only if the WS-Base gets its IP address automatically from a
DHCP server: Open the IP-DECT Server's Configuration
Manager and check the connection on the
Statistics > Base
station page. If the connection has been created success-
fully, you see an entry with the serial number of the WS-Base
and the status
connected .
Further steps
쑱
Only if the WS-Base uses a static IP address: Configure the
IP-DECT server.
Connecting to the IP-DECT server
1.
Open the Configuration > Base station page.
2.
Enter the IP-DECT server's IP address in the HOST entry
field.
3.
Click Save > OK > Reboot now > OK .
This restarts the WS-Base and connects it to the IP-
DECT server.
4.
Open the IP-DECT Server's Configuration Manager and
check the connection on the
Statistics > Base station page.
If the connection has been created successfully, you see an
entry with the serial number of the WS-Base and the status
connected .
COMfortel_WSB_Manual_V05_08_2017_de_en.book Seite 22 Freitag, 11. August 2017 1:46 13