Auerswald COMfortel M-720 Advanced Information Download Page 20

Page: 20 / 61

COMfortel M-720 - Advanced Information - V01 08/2021

Do not put through call

When you do not want to be disturbed, you can arrange for no more calls to be put through.

. . . Use

to select

Select Services

Do Not Disturb

Initiating ringback

If the line of a called subscriber is busy, you can arrange for a ringback (if the phone system or

provider supports the CCBS and CCNR services).

The service code for enabling/disabling CCBS and CCNR must be configured in the provider

settings.

Enabling ringback:

Enter the service code specified for the phone system / provider, e.g.

If you do not want a ringback, you can disable the function.

Enter the service code specified for the phone system / provider, e.g.

Cancelling ringback

After you have initiated a ringback, you can cancel it before the other party calls back.

. . . Use

to select

Select Services

Ringback Off

. . . You

receive a confirmation from the phone network Press the End call key

Enable/disable:

Status:

. . . Use

to select

Off

Enable:

Send

CCBS

(Completion of Call to busy subscriber)

Ringback when busy

CCNR

(Completion of Calls on No Reply)

Ringback when call is not answered

You can only activate one ringback at a time. Activating a ringback will automatically

cancel any ringback that is already active.
If the ringback is indicated before you are able to cancel it: Press the End call

key

Summary of Contents for COMfortel M-720





























































Search results

Summary of Contents for COMfortel M-720

Reviews:

Related manuals for COMfortel M-720

Brands by name

Popular brands

Auerswald COMfortel M-720, Advanced Information

Search results

Summary of Contents for COMfortel M-720

Reviews:

Related manuals for COMfortel M-720

Brands by name

Popular brands