Auerswald COMfortel M-510 Advanced Information Download Page 53

Page: 53 / 61

Attaching the belt clip

COMfortel M-510 - Advanced Information V03 10/2020

Appendix

Attaching the belt clip

The handset has notches on each side for attaching the belt clip.

•

Attaching the belt clip:

Press the belt clip onto the back of the

handset so that the tabs on the belt clip click into place in the
notches.

•

Removing the belt clip:

Press the centre of the belt clip firmly

with your right thumb.

Push the nail of your left thumb up

between the clip and the casing.

Slide the clip upwards to

remove.

Connecting the headset

Connect the headset with 2.5 mm jack to the left side of the
handset .

The headset volume corresponds with the setting for the receiver
volume (

p. 44).

Connecting the USB data cable

For data exchange between the handset and PC:

Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset

Charging the handset using a standard USB power adapter
(e.g. from your mobile):

Connect the USB cable plug into the USB socket at the bottom of the handset

Plug the

power adapter into a mains socket

Connect the handset

directly

to the PC,

not

via a

USB hub.

Summary of Contents for COMfortel M-510






























































Search results

Summary of Contents for COMfortel M-510

Reviews:

Brands by name

Popular brands

Auerswald COMfortel M-510, Advanced Information

Search results

Summary of Contents for COMfortel M-510

Reviews:

Brands by name

Popular brands