Auerswald COMfortel 1200, Setup Manual

Page: 42 / 68

Preparation
42
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015
3.
Insert the other RJ-10 connector of the spiral cord into the jack on the re-
ceiver.
Connecting a Headset
Requirements
– A wired headset corresponding to the technical data listed on page 35.
1.
Insert the headset connector:

COMfortel 1200: Pull the connector of the receiver out of the socket at
the back marked with
and insert the connector of the headset into this
socket instead (see Fig. 13).

COMfortel 1400: Insert the connector of the headset into the jack
labelled with
on the lower side of the telephone (see Fig. 14).
2.
Guide the cable to the outside using the corresponding cable channel.
Fig. 13: Connecting the receiver
Fig. 14: Connecting a headset