13
•
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between different countries.
Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi- Fi performs satisfactory.
We have already set the channels according to the requirement in different countries. Choose the country you are
staying from the list to get the correct channel.
•
Add / Remove AP
Add AP (Scan) - It will scan out a list of routers around.
Add AP (WPS button) - Choose this option to connect your Wi-Fi router via WPS if the router has a WPS button.
Remove AP - If you have already added a router and want to remove it, choose this option.
Note:
Always bring the radio within 2 meters of the Wi-Fi router for setup.
•
AP
If you have added more than one routers on the radio and want to switch to another one, select this option to
change.
•
Signal
This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by the radio. Usually signal levels
lower than -70dBm is at weaker level and if it affects the reception of your radio, you may need to optimize the
router location or check any problem of the router itself.
•
IP
The IP is set Dynamic by default. Select to change Fixed IP according to your network condition.
•
DNS
The DNS is set Dynamic by default. Select to change <Fixed> DNS according to your network condition.
Date and Time
The radio will set your local time automatically after the internet connection is completed.
If you want to do manual setting, change it by the following options:
•
Time zone
Auto-set Time Zone: This option is set by default.
Manual-set Time Zone: Choose this option if you want to set the time in another region.
Choose and highlight the region/city you prefer and press
[OK]
to confirm.
Coupled with NTP (use network time) and DST (Daylight time saving) will be adjusted automatically if you choose to
use network time (NTP).
•
Set Time Format
Choose either 12-hour or 24-hour notation you prefer.
•
Set Date Format
•
DST (Day Light Saving)
Enable on/off.
•
NTP (Use network time)
NTP is designed to synchronize a device's clock with a time server. Your radio will synchronize the time server by
default every time it powers up and connects to Internet.
This ensures a very high degree of accuracy in the radio's clock. You can change to use other time server by inputting
the URL address (see below NTP server). You can choose
“Do not use network time” if you d
on't want it to.
If you choose not to use NTP for clock synchronization, highlight the NTP (Network time protocal) and press OK to
make the change. You will see the Set Date & Time appeared on the menu. Select it and adjust the date and time as
you desire.
•
NTP Server
NTP is designed to synchronize a device's clock with a time server. Here it shows the server being used for the radio.
Language
The default language is English, you can choose other languages as preferred. Scroll with the
[
▲ /▼]
buttons on remote or
the
[Scroll/Select]
knob to the item with and press
[OK]
.
Scroll to highlight and press
[OK]
to select your language of choice. English, French, Spanish, Italian, German, Dutch, Polish,
Russian are available.
DAB Setup
•
DAB full scan
You can always carry out a new DAB scan by selecting this option. All current presets and channels will be erased.
•
DAB station list
The scanned DAB stations will be listed here for management. You can move position or even delete any station.
Scroll to the station and press
[
►
]
. A pop-up window will be presented: Move up, Move down and Delete.
FM Setup
•
FM Area
Choose the region according to your physical location to define the search range for the radio.
•
Scan setting
Either "All stations" or "Strong stations" (with stronger signal) can be selected.
•
Audio setting
You can choose to set "Auto Stereo" or "Forced mono" for the reception.
